Jump to content


  • Tweets

  • Posts

    • Thanks DX.  I've ploughed through the pages and dug out what I feel are the relevant ones. Obviously, some of these are duplicates of what I've put up before.  Anyway, I would be hugely grateful if someone can look over and advise. Reading though other posts and on other cases that I've had help with from here, I don't think they have much of a case - given the weakness of much of their "evidence" - but obviously I would be grateful for some expert advice from the helpful souls on here.    Thank you.    B   Witness Oct19_redacted.pdf
    • You came here for advice, soem advice has been given adn you question the validity and source of that advice. We are all lay peopele, ie not giving professional advice but it is based on experience of the world and in some cases working in the field that advice is given on. Now you dont have to take our advice, we wont get the huff if you prefer to look elsewhere or do something else. when I asked what you think they would do with your NI number it is to prod you to think for yourself and question why they would ask for this when there is nothing legal they can do with the information so wouild you be wnating to give it to them knowing that they would want it to break the law if they processed it. Now you can take that up with the company at the top but TBH unless you want to spend money on a lawyer they will not answer the question or fob you off with some ridiculous answer anyway.   so for the moment read a lot about  RLP and similar situations to yours ans make particular note of what happened to the peopel in the end. You will find no threads theat ended by saying " thanks to you I gor sued by RLP and owe them a fortune". It isnt going to happen and the reasons why are explained in many threads. They rely on your feeling of guilt to get anywhere
    • you need to respond to their letter saying that you belive that you ahve been paid correctly ( or underpaid if you are due a small amount of accrued holiday pay etc) and demand that they show a full account of what you received, when and why and how they arrived at this figure. You then reconcile that with your P45 and use the figures to bat off any furhter demands if they still akke one. Come back if they dotn drop the matter and give us the full breakdown on hours worked, hourly rate, gross pay, tax paid  etc
    • @dx100ukI never got a response to my SAR from Octopus.   But I have just received a 'letter before court action' from one of their legal representatives, who have been "instructed to consider legal action against [me] if full payment, a settlement or your proposals to make suitable repayments arrangements are not received in the next 30 days."   I'm reading the threads now. Any advice on how to proceed? 
    • I would say let them do their worst, it will surely backfire on them. Now with restrictive contracts that stop you working fro competitors- these are notoriously vague so often not worth the paper they are written on. also they have to be fair so for example if there are only 2 companies in the UK that make a certain product your employer cant say you arent allowed to work for the other one. If you were for example trained as a hairdersser and you were going to open a salon in the next street to your ex employer then the restriction would apply if worded correctly. Dont panic about this, your new employer will be au fait with the situation and time spent worrying about a nastly letter will in their eyes take you eye off the ball so concentrate on the new job.
  • Our picks

labrat

Anyone here do woodwork?

Recommended Posts

I'm looking at building a hot tub enclosure and just wondered if anyone can see if this sounds about right

 

The base is going to be 3x2 lumber, 7inch gap between beams with decking board across the top of that. 

 

This is likely to be raised about 2 inches at most to deal with uneven concrete but the supports are likely to be every 5-7 inches apart again

 

It's only one of the inflatable tubs at 700l so not as heavy as a real tub but obviously I still don't want it to fall through


Please note:

 

  • I am employed in the IT sector of a high street retail chain but am not posting in any official capacity,so therefore any comments,suggestions or opinions are expressly personal ones and should not be viewed as an endorsement or with agreement of any company.
  • i am not legal trained in any form.
  • I have many experiences in life and do often use these in my posts

if ive been helpful kick my scales, if ive been unhelpful kick the scales of the person more helpful :eek:

Share this post


Link to post
Share on other sites

You don't want DIY advice from me, labrat, :)but I see there are a few videos on youtube about hot tub surrounds.


Illegitimi non carborundum

 

 

 

Share this post


Link to post
Share on other sites

3x2 base will fail.

You need to build a proper base made of at least 6x2 treated timber.

Unless you have a solid concrete base and you just need the tub to be off it, in which case even 2x2 will be ok

Share this post


Link to post
Share on other sites

700l of water is 700kg.  Plus the weight of the bodies! - approaching a metric tonne


Share this post


Link to post
Share on other sites

It is a solid concrete base 

 

May have to have a rethink though the frame is just to level out the ground but will be raised by an inch or 2


Please note:

 

  • I am employed in the IT sector of a high street retail chain but am not posting in any official capacity,so therefore any comments,suggestions or opinions are expressly personal ones and should not be viewed as an endorsement or with agreement of any company.
  • i am not legal trained in any form.
  • I have many experiences in life and do often use these in my posts

if ive been helpful kick my scales, if ive been unhelpful kick the scales of the person more helpful :eek:

Share this post


Link to post
Share on other sites

You can create a chess frame of 3x2 or 2x2 and sink it into sand cement mix to compensate for uneven concrete.

Otherwise,  level out the concrete and you'll be in business. 

Use bal or mapei flexible self levelling compound.

Share this post


Link to post
Share on other sites

The base includes a manhole cover hence the need for it to movable

 

Think we have made a solution by moving the position to a corner of the lawn, so it's moved to 4 uprights, 3 half height walls and a roof - and cut a chunk off the price, now deciding if to use 2x2 or 3x2s as the uprights thinking 3x2


Please note:

 

  • I am employed in the IT sector of a high street retail chain but am not posting in any official capacity,so therefore any comments,suggestions or opinions are expressly personal ones and should not be viewed as an endorsement or with agreement of any company.
  • i am not legal trained in any form.
  • I have many experiences in life and do often use these in my posts

if ive been helpful kick my scales, if ive been unhelpful kick the scales of the person more helpful :eek:

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 Caggers

    No registered users viewing this page.


  • Have we helped you ...?


×
×
  • Create New...