Jump to content


Help With Nissan Almera 2001 N16


Please note that this topic has not had any new posts for the last 3261 days.

If you are trying to post a different story then you should start your own new thread. Posting on this thread is likely to mean that you won't get the help and advice that you need.

If you are trying to post information which is relevant to the story in this thread then please flag it up to the site team and they will allow you to post.

Thank you

Recommended Posts

I have left messages on forums and boards everywhere but not attracted any help... Hopefully someone on CAG can help.

 

 

The car a Y reg 2001, 1.8 Automatic Nissan Almera broke down 2 weeks ago, AA towed to local garage, they replaced Idle COntrol Valve and Throttle Body costing £475, but then the garage stated it also needs a new ecu as it is burnt out (and you can smell it)

 

The car starts and drives, but the garage have recommended I dont as it could and most probably will fry the new Idle Control Valve and New Throttle Body, So I have sourced a second hand ECU, Ignition Barrell, Key + Chip, and Transponder, fuse box.

 

I have fit this correctly but the car wiull not start, the immobiliser light stays on on the dashboard as if the imobiliser is not seeing the chip in the key.

 

This is where I am stuck, I have changed the whole darn thing and the ecu will not start the car with the new transponder key and chip.

 

Please please help, the car is great its only done 33,000 genuing miles, not a scratch on it and has full mopt and tax, it is worth about £1000 which is far far far too much to go scrapping it

Link to post
Share on other sites

I would put a post up on a nissan site. It sounds as though you know theissue. the ecu and transpoder has not linked with each other. therefore it will not start. there is a correct procedure for electronics and you need to make sure you have followed this. there are companies that will repair the old ecu. have you done a search on google for this?

regards vinnychoff

Link to post
Share on other sites
  • Recently Browsing   0 Caggers

    No registered users viewing this page.


  • Have we helped you ...?


×
×
  • Create New...